broadband amplifier
英 [ˈbrɔːdbænd ˈæmplɪfaɪə(r)]
美 [ˈbrɔːdbænd ˈæmplɪfaɪər]
网络 宽带放大器; 宽频放大器
双语例句
- A method for the design of the broadband power amplifier by small signal approach is introduced when large signal models of devices can not be acquired.
文章介绍了一种在无法获取器件大信号模型的情况下采用小信号法设计宽带功率放大器的方法。 - The Application of Real Frequency Technique in the Design of a Broadband Microwave Amplifier
实频技术在宽带微波放大器中的应用 - Broadband Power Amplifier Used in Dynamic Magnetic Measurement System
一种用于动态磁性测量系统的宽带功率放大器 - A Broadband Piezoelectric Amplifier Based on Compensation Technology
基于补偿技术的宽频带压电陶瓷驱动电源 - Design of Feedback Broadband MMIC Amplifier
反馈式宽带MMIC放大器的设计与实现 - The Design and EDA Simulation of Microwave Broadband Amplifier
微波宽带甲类功率放大器的设计与EDA仿真 - The Design and Experiment of A Broadband Switch Amplifier
级联宽带开关和放大器的设计和实验 - The Research of the Lossless Feedback Broadband Amplifier Technology
无损耗反馈宽带放大器技术研究 - A new optimization method for microwave broadband amplifier based on orthogonal design is presented.
本文给出了一种基于正交试验法的微波宽带分布放大器优化设计的方法。 - The Temperature Compensation for MMIC Broadband Amplifier Gain
宽带单片低噪声放大器的增益温度补偿 - Because of low noise figure, high linear, broad frequency scale and simple structure, lossless feedback broadband amplifier becomes one of the most important types of broadband amplifiers.
无损耗反馈宽带放大器以其噪声低、线性好、宽频带以及结构简单的特点成为重要的宽带放大器类型。 - The example shows that the method is effective and useful for the optimization of microwave broadband amplifier.
算例显示了该方法是有效的，对于微波宽带分布放大器优化设计具有实用价值。 - The Research about Broadband Fiber Amplifier
宽带光纤放大器的一些研究 - On the aspect of broadband, the design of the broadband power amplifier is summarized generally.
在宽带设计方面，论文就目前宽带射频功放的设计进行了较全面的总结； - The broadband amplifier is an important type of amplifiers using in modern communication systems.
宽带放大器是现代通信系统中的一种重要的放大器类型。 - In this article, we use Lorentz approximation to investigate the gain properties of multi pumping broadband Raman amplifier, and present some schemes for flattening the gain.
本文采用Lorentz线型近似，研究了多波长泵浦宽带Raman放大器的增益特性，并提出了宽带增益平坦的多波长泵浦方案。 - The diagram consists of a broadband MMIC amplifier and a integrated microstrip power equalizer, and can supply the TWT with driving power and gain equalization.
该电路由宽带MMIC放大器和集成微带功率均衡器构成，为宽带行波管提供驱动功率和增益均衡。 - Process of Study on Tellurite Glass for Broadband Amplifier
宽带放大器用碲酸盐玻璃研究进展 - A0.18 μ m CMOS, multistage cascaded, differential broadband limiting amplifier was proposed.
文章介绍了一种采用0.18μMCMOS工艺设计，多级级联、差分结构宽带限幅放大器的设计方法。 - Design of Broadband Amplifier in EMC
电磁兼容系统中宽带放大器的设计 - The Nonlinear Analysis Method and Network Design for Microwave FET Broadband Power Amplifier
微波FET宽带功率放大器的非线性分析方法及网络设计 - Some factors in CMOS process which limit the bandwidth of amplifier were analyzed, and thus a technique for enhancing the bandwidth of gigahertz broadband amplifier by using frequency controlled loop was presented.
分析了CMOS器件中限制放大器带宽的因素，并由此提出一种频率控制反馈方式来实现高速放大器，可将放大器的3dB带宽扩展至10GHz以上。 - A multistage cascaded, differential broadband limiting amplifier effectively restrains common-mode noise. Without increasing extra power consumption and layout area, the limiting amplifier with frequency multiplier and source followers effectively expands the bandwidth.
限幅放大器选用多级级连的全差分结构，有效抑制共模噪声，并且在不增加芯片额外功耗和面积的前提下采用fT倍频器和插入源极跟随器有效地拓展了带宽。 - The basic theories of low-noise amplifier and broadband design method are described in this paper. Two types of broadband low-noise amplifier have been developed using the negative feedback techniques and the lossy matching technology.
本文介绍了低噪声放大器的基础理论和宽带设计方法，运用负反馈技术和有损匹配技术，研制了两种形式的宽带低噪声放大器。 - The second chapter describes the basic theoretical knowledge required in the design of broadband power amplifier, including a basic description of the power amplifier and the basic model. This chapter also specifically describes the design of broadband power amplifier using broadband matching theory.
第二章系统的介绍了设计宽带功率放大器所需的基本理论知识，包括对功率放大器的基本描述和基本模型，还具体介绍了宽带功率放大器匹配设计所使用的宽带匹配理论。 - According to the characteristics of VHF-band circuit, a VHF broadband high-power amplifier was introduced in this paper.
本文根据VHF频段电路的特点，设计了一款VHF宽带大功率放大器。 - The broadband amplifier, attenuator and power splitter are used to control the amplitude of the clock trigger signal.
为满足幅度要求，采用了宽带放大器、衰减器和功分器控制时钟触发信号的大小。 - The module, made up of broadband MMIC amplifier, broadband microwave power equalizer and broad-band MMIC power amplifier.
该模块由前级MMIC放大器、（6-18）GHz宽带微波功率均衡器和末级宽带MMIC功率放大器构成。 - In the design of broadband low-noise amplifier, the thesis uses co-simulation with schematic and momentum based on methods of moments.
在设计宽带低噪声放大器的过程中，本文使用ADS原理图和基于矩量法的Momentum的联合仿真。 - Design a kind of power amplifier measuring platform to measure the nonlinear characteristics of the broadband power amplifier.
本文主要研究工作和贡献是：1.设计了一种功放特性测量平台，使用该平台测量了宽带功放的非线性特性。